What does OTIF mean in supply chain? OTIF stands for on time, in full. It is the share of purchase orders that reach the retailer inside the delivery window with every case ordered. A PO that arrives on the right day but short one case fails, and so does a complete PO that arrives a day late. Retailers score suppliers on it and charge fees when the score drops below their threshold.
OTIF stands for on time, in full: the share of your purchase orders that arrive at the retailer inside the delivery window with every unit ordered. A PO counts only when it passes both tests, so a complete order that shows up a day late fails, and so does an on-time truck that's two cases short. Retailers use the OTIF score to grade suppliers, and below their threshold the misses turn into deductions.
Most of the in-full half and a large share of the on-time half get settled in the warehouse that ships your retail and wholesale orders, before a carrier ever touches the freight. A 3PL that also handles your ecommerce fulfillment has to protect the retail PO from the same stock your web orders pull, or the in-full half breaks on a busy sales day.
How do you calculate OTIF?
The basic formula counts orders that passed both tests:
OTIF % = POs delivered on time and in full ÷ total POs delivered × 100
Here is how it plays out over one four-week period with 40 purchase orders to one retailer:
- 4 POs arrived after their delivery date.
- 2 POs arrived short. One of those was also one of the 4 late ones.
- That leaves 5 POs that failed at least one test, and 35 that passed both.
| Measure | Math | Score |
|---|---|---|
| On time | 36 of 40 POs | 90% |
| In full | 38 of 40 POs | 95% |
| OTIF | 35 of 40 POs | 87.5% |
OTIF can also be scored at different levels: by whole PO, by line or by case. Picture one PO for 500 cases that arrives with 480. Scored by PO, it failed in-full. Scored by case fill, it filled 96%, which clears a 95% case-fill bar like Kroger's. Before you set a target, find out which unit your retailer counts.
What counts as "on time" and "in full"?
On time means the date the retailer set, measured at the retailer's gate. That date has different names. Kroger calls it the Original Requested Arrival Date (ORAD). Walmart prints a Must Arrive By Date (MABD) on the bill of lading. Sephora measures from a ship window that opens on the Required Ship Date. On top of the date, many DCs book a delivery appointment, and missing a delivery appointment might add additional penalties. Kroger's policy lists a separate fee for a PO that arrives more than 30 minutes after its appointment.
In full means the quantity on the PO, and the hard part is which PO quantity. Sephora measures fill against the revised quantity you confirmed on your 855 acknowledgment. KeHE takes no substitutions or backorders and won't revise a PO for your shortage, so in-full is measured against the original order. If you cut a PO from 500 cases to 480 on the 855, Sephora scores the 480, while at KeHE those 20 missing cases count against you.
How do retailers measure OTIF? Five vendor manuals side by side
Each of these comes from the retailer's own supplier document. Rules change between editions, so the date of each one is listed. Check your vendor agreement for the version that applies to your account.
| Retailer (document) | On time is measured as | In full is measured as | Window and threshold |
|---|---|---|---|
| Kroger (vendor policy update, Dec. 2024) | PO gated in at the Kroger DC on the ORAD. A load after midnight still counts if it arrives inside the previous day's receiving hours. | Case fill rate: the share of the PO that was filled | 93% on time over each four-week period exempts you from late-PO fees for that period. Case fill under 95% draws a fee. |
| Walmart (Supply Chain Packaging Guide, Apr. 2026) | Load gates in on time for its DC Scheduler appointment. The Must Arrive By Date goes on the bill of lading. | Case count by PO entered in DC Scheduler before arrival, and the ASN | Walmart teaches its OTIF program through Supplier Academy. The packaging guide sets no percentage. |
| Sephora (US routing guide, v2026.1) | Pickup in the first one or two days of the ship window. A changed window needs an authorized PO change. | Fill per PO and SKU against your revised 855 quantity | Fill under 90% of the revised quantity draws a fee on the shorted units. |
| Costco (US Shipping and Routing Guide, July 2026) | Delivery appointment booked at least two business days ahead, with the right appointment type | Not defined in the routing guide | No OTIF percentage in the routing guide. A wrong appointment type gets the load refused. |
| KeHE (Supplier Policies and Procedures, Nov. 2025) | Shipped and delivered on the PO dates. KeHE pickups must be ready on the pickup date. | PO quantities as ordered, with no substitutions or backorders | Fill rate and on-time minimums are set in your signed terms and fee schedule. |
Kroger grades on time over each four-week period, so one bad week can cost you a period you'd otherwise pass. Sephora's rule covers pickup at your dock, while Kroger's and Walmart's cover gate-in at their DCs. Set the warehouse's targets per retailer, from its own document. Each retailer's routing guide is where these terms live, so read it before your first PO, not after your first scorecard.
Which half of OTIF does your 3PL own?
A 3PL owns the part of OTIF that happens before the truck leaves its dock, and the carrier and the retailer own the transit and the receiving after it.
| The 3PL owns | The 3PL doesn't own |
|---|---|
| Order cutoffs: the PO reaches the floor the day it arrives and gets allocated against live stock | Carrier pickup on collect freight, which the retailer's carrier schedules |
| The ship window: freight built and ready when the window opens or the pickup appointment arrives | Transit time once the truck pulls out |
| Complete orders: every case picked and scanned against the PO, so shorts are caught before the carton closes | The DC appointment slot, which the retailer's dock controls |
| The ASN and case counts the DC receives against, sent before the truck leaves | How the DC counts what it receives |
Pickup timing sits between the two halves, and Kroger's vendor policy assigns it. On Kroger-managed loads, the vendor owes pickup appointments early enough to make the ORAD, and if product isn't ready at the pickup appointment and the PO misses, the vendor pays the late-PO fee. On vendor-managed loads, the vendor or its carrier books the DC appointment early enough to make the ORAD. Walmart wants the case count by PO in DC Scheduler before the load arrives, so the shipping data counts as much as the freight.
On prepaid freight, a 3PL can book the carrier and request the appointment for you, but it doesn't drive the truck or control which slots the DC opens. When a PO misses, the records show which side caused it: the pickup timestamp, the bill of lading case count and the appointment confirmation. A pallet rebuilt at the DC dock or a short case is the warehouse's miss, while a late truck with a ready load and an on-time pickup is the carrier's fault.
What does missing OTIF cost?
Missed OTIF turns into deductions taken from your invoice. Kroger charges 3% of the invoiced amount on a PO that misses its ORAD for a vendor-caused reason. Walmart's OTIF fines, Target's on-time and fill charges, and how to dispute a deduction are covered in our guide to vendor chargebacks and how to stop them.
Those eat into your retail margins, damage your relationship with retailers, and potentially lose you massive accounts and cut off a revenue stream.
How KSP keeps retail POs on time and in full
Here is how KSP handles the warehouse half on a retail PO. Purchase orders arrive over EDI through SPS Commerce and are allocated against live stock before they release to the floor, so the retailer gets its cases and your site keeps selling. Our guide to omnichannel fulfillment shows how that allocation works. Every case and unit barcode is scanned against the order, and a mismatch stops the workflow until it's corrected. UCC-128 carton labels are verified before cartons close, the ASN is built from what was scanned onto each pallet, and it goes out before the truck leaves. Freight leaves on LTL or truckload from 29 dock doors, and KSP books delivery appointments and works with the retailer's carrier on routed freight.
KSP holds 99.999% order accuracy across 32.1M orders. For one display program, KSP built and prepared 611 outbound pallets for 611 Target stores within four weeks of receiving the product, and all 611 stores received their shipments on time, ahead of the installation schedule, with no damage or shortages.
Frequently asked questions
Are DIFOT and OTIF the same?
Yes. DIFOT stands for delivered in full, on time, and it measures the same thing as OTIF: the share of orders that arrived complete and on the agreed date. The name changes by region and industry. What matters is how your retailer defines on time and in full in its supplier documents.
What is OTIF vs OTD?
OTD, on-time delivery, checks only the date. OTIF checks the date and the quantity, so every OTIF pass is also an OTD pass, but an on-time PO that arrives short fails OTIF. OTIF is always equal to or lower than OTD for the same set of orders.
Keep your retail POs on time and in full
Your OTIF score is set by each retailer's own rules, and most brands find out what those rules are from their first deductions. KSP sets up every retail program around your retailers' routing guides before the first PO ships: labels, case packs, pallet builds and appointment rules go into the warehouse SOP for each one.
Send us your retailer list, their routing guides and your next PO dates. A KSP rep gets back to you within 1 business day and walks you through how each retailer's ship window, appointments and fill rules would be handled, plus an invoice built on your retail and DTC volume, line by line.